Metal Working - Hot Forging and Diecasting

Atomization: Lubricants / detaching products


Detaching water-based graphite for Steel and Ferrous metal

Renite S-26
(liquid dense - application: atomization)
 
Renite S-26 is a water-based, concentrate containing sinthetic graphite, used in forging of ferrous metals, including stainless steel. Renite S-26 is sprayed to dies at temperature in the range of 150°C to 427°C; the water vehicle evaporates, leaving a solid film lubricant coating well suited to high temperature and high pressure applications. Renite S-26 is supplied as a concentrate; after dilution, done with clean tap water, the mixture should be provided with a little agitation to maintain the graphite suspension.

Technical Sheet
 


Renite S-26 HP (liquid dense - application: atomization) 

Improved formula of Renite S-26 with the addition of finer sized, premium graphite and additives with greatly improved surface adhesion characteristics. It is for high performance.

Technical Sheet




Renite S-27 (liquid dense - application: atomization) 

It is an economy version of Renite S-26, because it contains amorphous graphite optimal for simple forging and extrusion.
 
Technical Sheet



Detaching water-based graphite for Aluminum


Renite S-28
(liquid dense - application: atomization)

Renite S-28 is a dispersion of graphite in water recommended as a lubricant and release agent for aluminum forging and extrusion operations. This lubricant is sprayed on working surfaces of tools and dies at temperature between 300° - 600°F (150° - 315°C), at the time of spraying, and the water vehicle evaporates leaving a solid graphitic film coating. This coating is well suited to high temperature and high pressure applications. Renite S-28 is supplied as a concentrate and it must be diluted with clean tap water. After dilution the mixture should be provided with a little agitation to maintain graphite suspension. Renite S-28 reduces build-up problems, even on narrow draft die. The metal-working operation is carried out without smoke, fumes and flames.

Technical Sheet
  



Renite S-28-A (liquid dense - application: atomization)

Renite S-28-A is a heavy duty variant of Renite S-28.
 
Technical Sheet
 


Detaching water-based graphite for Aluminum, Brass and Copper

Renite S-29 (liquid dense - application: atomization)
 
Renite S-29, improved formula of Renite S-28, is a complex water and graphite dispersion containing a variety of suspending agents and high temperature, extreme pressure lubrication enhancing additives. This lubricant is sprayed on working surfaces of tools and dies at temperature between 300° - 600°F (150° - 315°C), at the time of spraying. Renite S-29 is optimum for aluminum, copper and brass forging.

Technical Sheet
 


Detaching oil-based graphite for Steel


Renite #45-HT (liquid dense - application: atomization or swabbing)
 
Renite #45-HT is a graphited oil with proprietary dispersants for metal forming applications, especially when using molds with pins and punches. Renite #45-HT has high boiling point base oil (355°C = 670 ± 30°F); when applied to a hot metal surface, the oil vehicle boils away cleanly to leave a silvery-black solid lubricant film. This film reduces frictions, prevents the hot metal work-piece from sticking to the die and protects the surface from oxidation. Renite #45-HT is a ready to use lubricant, suitable for spray or swab application. For applications where a lighter lubricant is needed, Renite #45-HT may be blended with a clean, light oil.

Technical Sheet

 
 

Need
information or quote
Click here

 

Metal Working

Top

Hollow Glass Production